RFIDS™ TAGs & wireless sensors

RFIDS™ provides long range, ultra low power consumption with flexible I/O and sensor options in a small tag form factor.

All RFIDS™ tags have configurable radio modes, configurable radio activation intervals (a.k.a. blink rates) and configurable output power.

RFIDS™ is a highly secure system. Contrary to tags that use MAC or IP address as identifiers, the 40-bit unique identifier (UID) of RFIDS™ is factory programmed and untamperable. Along with encryption and multiple passwords for tag configuration and data access, it makes RFIDS™ highly secure. Readers also have 40-bit UIDs, which makes it possible for the network to verify that all readers are where they should be and are authorised.

Examples of uses of sensors and user interface features
      The tag's temperature and humidity sensor can be used for telemetry functions as well as for logging of environment. Alerts can be sent if assets or goods are exposed to temperature and/or humidity exceeding set limits.
      The tag's motion sensor can be used to send information about an asset's movement, to wake up a tag when the asset is moved, or to send alert message when vibrations exceed a certain limit.
      The tag's anti-tamper sensor can be used to send alert message when a tag is removed from an asset (asset tag version) or from a person (wristband tag version)
      The tag's light indicator or sound indicator can be used to find an asset faster or to indicate a tag status message
      The tag's call button can be used to send alert message or to confirm that an asset has been found.
 
More information about RFIDS™:
      Readers
      Evaluation kits
      Enquiries
 
Product overview
Tracking, identification
Size (mm)
Protection
Battery
Special feature
Part number
Samet™ small asset tag
40(56)×29×13
IP 54
CR2032 (h)
Samet™ small asset tag
40(56)×29×13
IP 54
CR2450 (s)
Rugged asset tag
40(56)×40×15
IP 54
CR2032 (h)
Rugged asset tag
40(56)×40×15
IP 54
CR2450 (s)
Card tag for personnel
84×40×8
IP 54
CR2032 (h)
   
 
 
Security, safety
Size (mm)
Protection
Battery
Special feature
Part number
Tamper-proof asset tag
80 (96)×40×20
IP 54
2×AAA (h)
Removal sensor
Helena™ tamper-proof wristband tag
40 x 60 x 15
(band 200)
IP 65
CR2032 (h)
Removal sensor
           
Locating, positioning
Size (mm)
Protection
Battery
Special feature
Part number
Pick-to-light tag
80 (96)×40×20
IP 54
2×AAA (h)
Bright LED
Pick-to-light tag with confirmation button
80 (96)×40×20
IP 54
2×AAA (h)
Bright LED and confirmation button
   
 
 
Environment and status monitoring
Size (mm)
Protection
Battery
Special feature
Part number
Temperature sensor TAG
40 (56)×40×15
IP 54
CR2032 (h)
0.5°C accuracy temperature sensor
Temperature sensor TAG
80 (96)×40×20
IP 54
2×AA (h)
0.5°C accuracy temperature sensor
   
     
Custom and OEM TAGs

Free2move Scientific offers customisation of TAGs. The following are the most common custom requirements:

      TAG enclosure with customer logo in relief
      IP66, IP67, NEMA, ATEX
      Different TAG form factors
      Increased memory, e.g. for sensor logging
      Different sensors and sensor combinations
      Different TAG user interface features, e.g. indicators and buttons
      Different frequencies
      TAGs for OEM and/or surface mounting (SMD)
      Additional protocol features
 
Footnotes:
(h) : battery holder mounted
(s) : battery soldered to TAG
Back to products
Enquiries
Home

© Free2move Scientific S/B 2008. All rights reserved.